The continuous ink supply system (CISS or CIS
for short) is an external bulk ink system supplying ink directly to your
inkjet printer which will cut your printing cost by up to 5 times, and
it is a cost-effective alternative for ink-jet printer cartridges. While
offering the exact same quality of print as own brand, manufactured
cartridges, continuous ink systems offer at least 5 times as much ink as
normal printer cartridges. With replacement ink bottles costing around
the same price as a set of compatible cartridges, using a continuous ink
system is guaranteed to cost you less, especially if you're a high
volume, bulk ink user. And it is the choice of many home users, schools,
colleges, businesses, design studios and photographers worldwide.
Prick two holes in the ink bottle, Fill the 4 colors inks into the CISS
ink reservoirs. Make sure the ink colors are matched to the correct ink
reservoirs: Y. M. C, K.
3.Fill inks to the ink cartridges
1) Cut the mouth of syringe to "V" shape, in order not to damage the ink
exit of ink cartridges and extract ink easily from ink reservoirs to ink
cartridges.
2) Puncture the ink exit film.
3) Extract ink from ink reservoirs to ink
cartridges by the syringe. Please make sure that the ink cartridges have
no air.
4) Place the rubber plug to the holes on the
ink reservoirs.
4. Install the CISS to the the printer and
Printer recognize the CISS chips
If your printer installed the original cartridges, please first take it
off, then open the printer and place the CISS cartridges, press the most
left button, it will need some time for printer to recognize the CISS
chips, please wait, when only the power button is on and not flash, it
finished recognition.
5. Fix ink tubes
Fix the ink tubes by support arms, please do not make the tubes too
tighten, or it will block inks supply.
6. Please make sure take off the small rubber
plugs when Print.
7.
Nozzles check and head cleaning
Right click the printer, select "Printing preferences", select "Maintenance", You can see
"Nozzle Check(N)" and "Heat Cleaning(H)".
1) Nozzle Check
2) Head Cleaning
Note: When you make Sublimation Transfer,
please set select "Photo" or "Best Photo", and "Mirror Image".
8. Refill inks.
Please pay attention to the ink level in the reservoirs, if the ink
level is below 1CM, please add inks,.
Take off the big rubber plugs, fill inks into the CISS reservoirs.
NOTES: 1. Please place the Ink tank and printer at the same level.
2. PLS take off the small rubber plugs while printer is working.
3. Refill the ink in time when the ink level of outer ink tank reaches
the ink refill warning window.
4. All the inkjet printer is very easy to clog, so keep the printer
working.
