|
1. Put the glue on the top of the table.
2. Put the glue in the groove.
3. Cover glue board, install the handle, counter clockwise rotation of the handle
to bring the glue roller evenly with the glue.
4. Observe the thickness of the glue on the roller, according to different
materials, the weight of the thickness of different needs of the wallpaper ,
adjust the thickness of the glue.
5.
The wallpaper hung on the bracket and pull the wallpaper, so close to the
roller, pressure roller is pressed down, turn the handle, the wallpaper,
wallpaper and paper cutting front flush.
6.
When the meter is pressed down to zero, the display number is all 0, the counter
clockwise rotation handle, you can evenly on the glue, in accordance with the
provisions of the number of meters cut.
| 
