Attention
1.The
change of static grinding wheel: the change is appropriate if the machine cover
is removed, and three cap nuts on grinding wheel base are unscrewed and the bolt
is taken out. (Notice: three nuts should be tightened in turn with proper
tension, in case of damaging the grinding wheel and automatic removal of the
nut.)
2.
The change of dynamic grinding wheel: the change is appropriate if the
tightening bolt is unscrewed, and the kicking-out device is removed firstly and
then the dynamic grinding wheel is removed. The location bolt must be embedded
into the small round hole on the back of dynamic grinding wheel correctly when
the dynamic grinding wheel is being installed.
3.
The leveling of the grinding wheel: the parallel status between dynamic and
static grinding wheels is the key to guarantee that this model is stable,
endurable and highly efficient, which must not be negligent. The leveling must
be completed after the change of the grinding wheel.
|
1 machine plug, adjust the grinding
wheel. Method: turn the compass, turn right, hear the rustle, stop
spinning.
2 add water, with plastic pipes connected to tap water, water is not too
large, open to the minimum, so that water evenly into the funnel.
3 add soybean, soak in summer for 8 hours, soak for about 12 hours in
winter, slowly pour into soybean. |