|
1. Before changing
blades or install blade, please make sure that the machine is unplugged.
2. Remember to wear
protective gloves to install the blade since blades have sharp edges.
3. Set thermometer to
a moderate temperature, move regulator forward to increase the
temperature and backward to decrease it.
4. Put the blade onto
operating platform, then make sure the bottom side switch button is on
before cutting.
Attention:
Hot knifves may overheated. In
case of overheating turn off the machine and let it cool down to avoid
damage to the blades. After 15 seconds of work let the blades cool down
for 45 seconds.
|
