|
|
|
Full Copper
Vertical Toilet Bath Tub Concierge Floor Bath Tub Sitting Faucet |
|
|
|
Function
|
Installation steps:
1. Prepare the nozzle, hot and cold water was 15 degrees, and flush with the
ground
2. At the interface wrapped around the raw material, and tighten the interface
(embedded after the completion of the laying of tiles)
3. Position with a tripod and drill with a drill to set the expansion screw hole
at the mark
4. straight pipe points up and down, fixed a tripod
5. Wear high pressure pipe
6. Set the plate
7. Connect the main body and tighten the high pressure pipe with the faucet
inlet
8. Place the expansion screw in a pre-drilled hole
9. After the installation of the main body with the embedded inlet and then a
good connector, and tighten the screws
10. Insert the main body into the expansion screw and tighten the expansion
screw
11. Put down the decorative plate
12. Installation is complete |
|
| Parameter: Package size:
35.8"x13.4"x3.5" (91*34*9cm)
Gross weight：7.8KG(17.2lb) |
|
Items included:
1 set of #C Freestanding Bath Faucet (021126)
 |
|
Item# |
Description |
QTY |
Unit |
Note |
|
021126 |
#C Freestanding Bath Faucet |
1 |
Set |
|
|
|
|
