• In order to ensure the safety of electricity, the voltage of the machine is 220V and the power is 3KW.

• This machine can't be used with a plug directly, it needs a wire to connect the machine to power line directly. (the cross-sectional area of copper power core must be larger than 2.5 square millimeters.)

1. Energy saving, the material hopper is driven by manual;

2. Durable, the whole body of it is made of stainless steel;

3. Safe enough, if the temperature of oil in the oil slot goes too high, it can be automatically shut off;

4. Easy to operate, a new operator will become skilled in minutes;

5. Convenient, the temperature of oil can be adjustable by the temperature controller;

6. High efficient, it produces 25pcs in about 5 minutes;

7. Multi shape of donuts, 3 different moulds we provide for you;

8. Voltage can be modified to meet your local standards.

Operating Instructions

1. Unpack the machine, and choose the mold you need. Then install the machine. (Do place machine in horizontal position.)

2. Connect power. Make sure that the power requirements of the machine do match the power source as specified on the data plate. But DO NOT turn on the heating switch when you want to change the mold.

3. Have all the material needed to make donut.

4. Pull oil into fryer tank, and oil must over the heating pipe.