This product is used as a tightening
conductor in overhead line construction. When using the product, first
release the wire rope or galvanized wire on the wire take-up device and
fix it on the cross-arm. Hold the wire with the wire-gripper and then
pull the special wrench.
Due to the anti-reverse effect of the pawl, this thread take-up device
gradually winds the wire rope or galvanized iron wire around the ratchet
drum to tighten the wire. Fix the tightened leads to the insulators.
Then release the pawl to release the wire rope or galvanized wire, then
loosen the wire clamp and finally wind the wire rope or galvanized iron
wire around the ratchet drum