Grease Gun has advanced design, simple
structure, reasonable, safe and reliable use, high oil pressure, fuel
economy and other advantages. Applicable to all kinds of mechanical
equipment, vehicles, transmission parts in the process of adding grease.
Instructions:
First screw up the screw rod handle, remove the screw nut, put the
cylinder cover and pressure plate, leather bowl out of the cylinder, and
then screw down the gas nut, put the grease into the barrel (leaving
pressure plate, compression spring And the gap of the cup), then the
upper part is assembled and tightened in situ, the screw shaft is
rotated downwards, the compression spring is compressed (without
excessive force), the deflation nut is released, and the pedal is
stepped several times. Each time the riding frame must be raised to the
highest position, it must be reciprocated again and again so that the
deflation nut can be oiled, tightened, and then stepped more than twice.
The high pressure tubing generates high pressure, and the oiling gun is
pulled to trigger the oil.
Use cautions:
1. When the oil gun does not come out of oil, the strainer and nozzle
must be cleaned.
2. When both ends of the high-pressure hose are disassembled, the random
replacement O-ring must be replaced. |