This device adopt Electro-Magenetic induction theory, can fast heat
small metal parts on auto or machines. Mainly used for heating
Rusted/Frozen/Corrosive Bolt, Nut, Fasteners,Suspension Nut, Gears,
Pulley, and Bearing etc. Meanwhile, it also can help removing stickers
on cars.
Heating abilities: In around 30 seconds, it can heat a 20mm diameter
bolt to a temperature above 300 Celsius, max temperature can reach 750
celsius.
1. Description
The Mini-Inductor uses electromagnetic fields for the heating of ferrous
and some non-ferrous metals without the danger of an open flame. This
flameless heat system is also faster, smaller, and more precise than
oxy-acetylene system.
Can turn a 3/4"nut cherry red in 10 seconds.
2. Applications
Frozen/Rusted/Stuck/Corroded/Thread-lock compounded nuts & bolts,
fasteners, steering & suspension nuts, bearings, gears, pulleys, inline
nuts, fuel tank strap nuts, 02 sensors, brake line nut, lug nuts,
exhaust manifold bolts, harmonic balancer bolt, windshield wiper nuts,
A/C lines, seat belt bolts, U-bolts/drive shaft bolts, bearing hub &/or
race removal, tie rod sleeves, soft hail dent removal(PDR), metal
fabrication, soldering, heat treating, and free up frozen hinges.
Also removes undercoating and bed liner from nuts and bolts.
3. Specification
Model No. |
Type |
Input
Voltage |
Rated Power |
Max Output Power |
Plug Standard |
Net Weight |
KIA-1000W |
Handheld |
110V
60Hz |
1000W |
1100W |
American Standard
|
1.3KG |
Heating bolt diameter: φ5-40mm(0.2-1.57")
Heater dimension: 38cm*6.8cm*6.8cm(15"*2.7"*2.7")
Induction coil diameter*Quantity: φ30mm(1.18")
*2PCS, φ40mm(1.57") *2PCS, φ50mm(1.97")*2PCS, Spare wire*2PCS
|