|
Note:Two styles
are shipped randomly. |
|
Description |
| Designed for
printing textiles and other materials may be used on food,
t-shirts, mouse pads, puzzles, ceramic tiles, |
| and other flat
surfaces items by using the flex, flocking, transfer printing
paper, sublimation etc. |
| The press is
equipped with a manual override, a digital display, and a sound
signal at the end of work. |
|
Parameters |
| size |
15"*15"(38*38cm) |
| Voltage |
110V |
| Time
range |
0s-999s |
| Max
temp |
0-250℃(482℉） |
| Package size
|
27.56*18.11*16.34 inch
(70*46*41.5cm) |
| Gross
weight |
60.9LBS(27.7KG) |
|
|
Using method
|
| 1.set
pressure |
| Adjust pressure at the top
of the tray in a clockwise direction to increase pressure and in
the opposite direction to decrease by turning the knob. |
 |
| 2.set
temperature&time |
| Press on the on
/ off switch located on the side of the heat press to be
energized. |
| Press once on
the "OK", screen show "P-1" on the display. Press “▼”or “▲” to
the desired |
| temperature. |
|
 |
| Press once
again on "OK", screen show "P-2" on the display. |
| Press “▼”or “▲”
to the desired time. |
|
 |
| Press “OK”
again after finish all setting to come out setting mode. |
| Put objects
when the machine has reached the desired temperature, close
heating plates, waiting time. |
| When times up,
machine will ringing, then lift heating plates, take out
printing items |
|
 |
|
Please
comply with these instructions |
| 1. Do not put
the wire on heating plates cover. |
| 2. Do not touch
heating plates when heating up. Caution: Risk of burns. |
| 3. Do not open
the machine box and make changes to the device. |
| 4. Do not allow
liquid or metal objects inside the hot press. |
| 5.Make sure the
machine is connected with a plug connected to the mass. |
| 6.Power off the
machine when finish using. |
