|
|
50W激光电源
|
New HQ 50W Power Supply for CO2 Laser Engraving Cutting Machine
|
Brand New, High Quality And Extra Long Life
1.It can be applicable to 50W laser tube of a number of manufacturers. |
 |
|
Input |
Input Voltage |
AC110V |
|
AC frequency |
47—440HZ |
|
Cold Surge Current |
≤60A(AC220V Input) |
≤30A(AC110 Input) |
|
Current Leakage |
≤0.7mA（AC220V Input） |
≤0.4mA(AC110V Input) |
|
Output |
Maximum Output Voltage |
DC 30KV |
DC 5V |
DC 24 |
|
Maximum Output Current |
DC 25mA |
1A |
1A |
|
Efficiency |
≥90﹪（full load） |
|
Mean Time Between Failure (MTBF) |
≥20000H |
|
Response Speed |
≤1ms（from the switch Signal is given to the output current
up to 90% of the setting current） |
|
Control Interface |
TTL level switch control (details refer to the control
terminal specification) |
|
Pressure-proof |
Input-Output, Input-Shell: AC1500V 10MA 60S |
|
Protection |
can work in open-circuit condition for a short time （Require
a good protective earthing and avoid arc between the
positive and the machine shell） |
|
Environmental |
Operating Temperature：-30~65℃），Relative Humidity (RH) ：≤90﹪ |
|
Cooling Way |
Natural air cooling |
|
 |
 |
|
