|
|
无标题文档
| NEW 1set of Acrylic luminous letter bending machine Tool 110v 220v AC |
 |
Advantages：
PTC heating components, Safety and energy saving,Heating up fast,
Long service life,Uniform heating;
Automatic constant temperature and without tedious temperature
Settings.
It is more convenient to use. The suitable thickness is 1.5-4mm,
do not produce flue gas when heated,
non-stick plate.
|
 |
Instructions:
About 60 seconds after turning on the power supply, hot bending operation can be performed. Make the bending machine is perpendicular to the acrylic board, in proper position, keep a few seconds can make acrylic softening. Soften the edge of the literally radian bending, then glue it.
This product preheat time is shorter, restart it won't waste too much time. So if you don't use it more than 3 minutes, turn the power off. Don't put the heating plate on the power cord.please pull the plug a long time without use.you can store it after cool it to 50℃.
Voltage:110V- 220VAC
Power : 60W
Heating plate size: 100mm*50mm*2mm 100mm*2.5mm*2mm
MAX Heating Temperature : 200 °C |
|
