Before Using
1.Put the machine smooth
2. Adjust the roll gap, clockwise to tighten and counterclockwise to loose.Starting from the smallest gap, counterclockwise a circle, roll gap increased by 0.06”(1.5 mm).
3.Wash the machine before use
Note :
1-
Can’t adjust the roll gap too tightly .
2-The ground wires should be attached to the machine.
It is chain driven motor.
This machine has a reversing motor switch.
|
Operation Steps
1.Choose the proper power(110v)
2.Cut a wedge on the sugarcane before put it into the machine
3. Starting the processing
4.After squeezing finished, you should wash the rollers timely, make sure no sticky in juice box and keep it clean. Juice yield : 75%
Packing list :
Tray x 1
Strainer x 1
User Manual x 1 |
