|
|
新建网页 1
|
220V
Submersible Deep Well water Pump |
|
QJD series pump for deep well is the best
appliance to get water from deep wells. They adopt the most advanced
tehchnology after several years, careful studies made by our technicians. They
are connected with grainless motor and pump. The pumps have positive and
negative formation conductors and other important parts make a hole body,
making them elegant and excellent.
This is for clear water only, if water is dirty or muddy,may cause
motor to shut off. |
|
Specifications:
Input(single
phase）: 220V
Cable: 131.2ft
Outlet diameter： 1 inch outlet
Head of delivery: 131ft
Pump into the water: Max. depth 16.4ft (5m)
Rated power: 1HP/0.75kw
Rated flow: 8.9 GPM at 131ft
Speed: 2850r/min
Frequency: 50Hz
|
 |
|
 |
Characteristics:
1. Small diameter, light weight, high flux, strong
output and anti-sand quality.
2. Especially our techical innovaton solves the
problem of stabilization of deep well pump quality.
3. Get water from small-diameter wells, farmland mine wells and family wells.
|
| Applying conditions:
1. Do not make the system in a failure of
dry running condition, it will damage parts and burn motor
2. Minimum internal diameter of well: 4"(102mm).
3. Pumps cannot be frequent started. Too frequent started will damage
the motor
4. Cable should be every 4.9-6.6ft (1.5-2 meters) with plastic bags tied
on the water pipe
5. Sulfureted hydrogen percentage is no more than 1.5mg/L
6. Granularity: Max. 0.0079"(0.2mm)
7. Water temperature：Max.40 °C
8. Pumps must be reliable connected with ground. Ground wire must not be
false connected to power , make well charged resulted in danger.
9. Pipeline must be reliable sealed, no leak, otherwise flow can not
meet the requirements.
10. After electric pump is right installated,Wells must be good covered,
to prevent unknown items fall into the well pump.
11.Acid and alkali degree: PH 6.5-8.5
|
 |
|
|
 |
 |
|
Item
Included:(144002)
1*Submersible Deep Well water Pump |
|
