|
|
新建网页 1
|
Automatic
Wire Stripper |
This machine is easily to use,
portable,energy saving and good looks,just like the normal stripper
machine usage.
Adjust distance between blades and shaft in accordance with the cable
size(the insulating layer stripped but not hurt the inner conductor)
Feeding: strip the cables through feeding hole( you can adjust the
feeding hole according cable size to the proper position which cables
can enter into but not swing)
Stripping: (hand operated) rotate hand crank in order to peeling, if
can’t peel:
1、too small wire diameter
2、the blades center not in line with groove center( adjust the blades
core)
3、blades edge is too dull( sharpen the blades)
Notice: don’t input your hands into the machine in any circumstance. |
|
 |
| 1 |
Plastic regulating
nut |
| 2 |
Blades regulating
nut |
| 3 |
Motor |
| 4 |
Feeding panel |
| 5 |
Feeding panel |
| 6 |
Feeding hole |
| 7 |
Reducer casing |
| 8 |
Shaft |
| 9 |
Blades |
| 10 |
Switch |
|
 |
|
Characteristic |
|
Wire range |
Φ1.5mm~
25mm(Φ0.059"~ 0.98") |
|
Power |
0.18kw |
|
Voltage |
110v |
|
Weight |
13kg(28.67lbs) |
|
Size |
240*320*320MM(9.45"*12.6"*12.6) |
|
| Front |
Back |
 |
 |
|
