1. The sharpener is of household type and
suitable for cutting edges of various cutters.
2. The switch is a positive and reverse switch. When the steering wheel
of the grinding wheel is shifted, press the stop position of the middle
gear to stop for a moment, not directly to the other direction.
3. Before grinding according to the shape of the adjustment fixture tool
position, tightening handle locking tool, sliding around grinding tool
in F type bracket.
4. To pour water to the grinding wheel below the sink before grinding,
water level to the sink mark, grinding process, water in the water if
needed to keep adding loss, during grinding tank is always water, not
allowed to dry grinding.
5. After grinding, the water in the tank should be poured out, and the
dirt produced by grinding will be washed clean.
6. When the grinding wheel causes the surface roughness due to grinding,
it is necessary to use the dresser to trim the grinding wheel.
|