1:
Adjust
distance between blades and shaft in accordance with the
cable size(the insulating layer stripped but not hurt the
inner conductor)
2:
Feeding:
strip the cables through feeding hole( u can adjust the
feeding hole according cable size to the proper position
which cables can enter into but not swing)
3:
Stripping:
(hand operated) rotate hand crank in order to peeling, if
can’t peel:
3.1 Too
small wire diameter
3.2 The
blades center not in line with groove center( adjust the
blades core)
3.3 Blades
edge is too dull( sharpen the blades)
Notice:
Don’t
input
your
hands into the machine in any circumstance.
|