|
|
|
DL-500 110V BottleLid Cap Gasket Sealing Machine
|
|
|
Introduction
DL-500 series electromagnetic
induction sealing machine is a kind of non-contact sealing machine,
using electromagnetic induction principle to induct heating the
nonmetallic bottle, like plastic bottles, glass bottles. This machine
is used widely in the field of medicine, chemical industry, food,
beverage, grease, cosmetics and so on. It can improve your product
grade, protect against moisture, extend guarantee period, strengthen
anti-fake properties and improve the speed and quality of sealing. As
to metal containers and sharp/cusp bottle lip, be sure not to use this
machine.
|
|
Consist of Machine
Electromagnetic induction sealing machine
is consist of inductive power and inductive shell cover. Power is as to
generator, which works in the middle-high frequency areas. The shell
cover is a plastic box, which contains inducting coil.
|
|
|
|
|
|
|
|
Working Environment
The highest
working environment
temperature of the machine is 45℃,the highest Relative Humidity is
80%.The machine should be used in the environment with ventilation. The
bottom of the inductive power and the side of the air vents should be
kept clean. Excessive temperature and relative humidity have bad effect
on the working life, even damage the machine directly.
|
Technical Parameter
Type
|
DL-500
|
Power
|
AC110V
|
Output
Power
|
0.8Kw-1.2Kw (Adjustable)
|
Static
Power Consumption
|
<0.1A
|
Max. Allowable
Current
|
<6A
|
Work
Frequency
|
30KHz（±5%）
|
Sealed Diameter
|
Φ25~Φ100（mm）
|
Working
Highest Temperature
|
45℃（113℉）
|
Relative
Humidity（RH）
|
≤80%
|
Shell Protection
Grade
|
Ip21
|
Dimensions
|
540*335*170mm
|
Weight
|
2.8kg
|
Resume
Function
|
yes
|
|
Operation
Instruction
|
Turn On
Switch on the machine, the nixie
tube will show the default setted time "1.5s".And the LED screen
is in the middle, the default output power is 1000W.The 500L
machine has the resume function, which remembers the last
parameter before power outage.
|
|
|
Adjustment
1.Power Adjustment
Press
"Increase Power" or "Reduce Power" to adjust the Output Power.
The LED screen displays 800W, 900W, 1000W, 1200W in sequence.
When the sealed diameter is less than 30mm, you can improve
sealing speed by setting power "High". When the sealed diameter
is more than 60mm, you can get a better sealing quality by
setting power "Low".
2.Time
Adjustment
There are
two buttons for sealing time adjustment. The left is for single
digits, and the number you can choose is 0-5. The right is for
deciles, and the number for choosing is 0-9. So the range for
time adjustment is 0.1s-5.9s.
|
|
Try Sealing
Put the bottle with sensing
film (aluminum foil side up) exactly under the inductive shell
cover. Press the button on the top of the inductive shell cover,
then the sealing time will count down. There will be sound
reminders at the beginning and in the end. When the time comes
to zero and show the count number again, then the sealing has
finished.
|
|
Check the sealing situation.
If it is tense, level and smooth, or gaskets cardboard has
completed the separation, or the film and bottle has cohered
together, or the sealed part looks wonderful. If so ,you have
got the qualified seal.
If it sealed partly, maybe the film and the bottle don't press
tightly, you can try it again.
If it looks good, but when you pull gently, the film separates
from the bottle. It maybe the sealing time is short or the
material of the film and bottle is different. Then you can
adjust the sealing time or change the film.
If the seal is crumpled and the bottle melts, it indicates the
sealing time is long. You can shorten the time properly.
|
|
Start Batch Production
If the seal can meet your
requirement, then you can start batch production. You should
adjust the sealing time if you change different batch of bottle
or film.
If you need to check the time, please press the "Show" button
shortly. And you can clear the number by pressing the "Show"
button 2s. The machine will shut down automatically if you have
no button action within 15min. If you don't unplug the power
plug, the system will remember the last data (like output power,
sealing time, count number) and work when you start next time.
No matter in which state, 500L machine can remember present
parameter automatically.
|
|
|
This
package included (181022):
1 set Aluminum
Foil Bottle Cap Gasket Sealing Machine 110V
|
|
