|
|
 |
|
Tensional For PET/PP Strapping#181221 |
 |
| Widely used in the paper, aluminum,
steel, wood, wooden box packaging, chemical fiber, cotton, tobacco,
chemicals, metal products and other industries. |
 |
|
model |
Winch device |
clip6/8" |
clip5/8" |
clip1/2" |
|
Applicable packing size |
bandwidth |
13-19mm |
19mm |
16mm |
13mm |
| With
thick |
0.4-0.9mm |
0.4-0.9mm |
0.4-0.9mm |
0.4-0.9mm |
|
weight |
14kg |
1.6kg |
1.6kg |
1.6kg |
|
Applicable
packing tape |
PP and PET |
|
| Weight:1.3kg length :27cm |
| Operation Instruction:
1: Put packed bandage
to circle in the packing case , the right hand holds tightening. Presses
the handle, put packed bandage under the clamp and cutter body. The
packed bandage terminal have to surpass tool. The pine will be open for
business the tight pole.
2:Put packed bandage
slips to the cutter and trough and spindle
silt.
3:The left hand
swings the handle until packed bandage tightened.
4:Pull packed
bandage after the suitable loose allowances under .Put sealed buckle to
open the mouth to face. Place on the packed bandage.
5:Let the pliers
open completely outs in seals fastens. Closes up the handle will cause
to seal buckles clamps completely. Dismounts the pliers.
6: Presses down
tightens the pole, shuts off packed bandage. Suppresses tightens the
pole the tool to the right lateral Until from packed bandage takes to
bring with dismounts. |
|
Strapping Sealer Tool |
| This tool applies
to all models of PET plastic steel belt. Used in conjunction with other
tensioning device, hand tighten, lock, cut, easy to operate quickly.
Ordering detail, please refer to the right parts, And indicate part name
and number. |
 |
|
Weight:1.6kg length :52cm
Security
notice:
1:The tool
is designed and production to ensure the safety of operation, in
order to better use the tool, please read the security notice
carefully.
2: Please
wear safety glasses, helmets and gloves etc. when operating the
tool.
3: Please do
not place hands or other parts of the body between binding belt
and binding properties.
4: The tool
used in conjunction with other tension tool, when the banding
belt is tightened. Do not stand with banding belt in the same
straight line to prevent banding belt breaking.
5: Replace
the tool parts, it should be replaced comes with the original
accessories. |
| Maintenance
instruction:
1:With the brush clean this tool, or blows on
the fuselage dust and the foreign matter regularly with the
clean dry compressed air.
2:Each
active part carries on the lubrication with the right-duty
machinery lubricating oil. |
|
|
Item include:
1 Tensional For
PET/PP Strapping （181221）
1 strapping sealer tool
(181225) |
| |
|
