|
From screen print and printing process,
the plate is various processes (the tension screen frame, cleaning,
sizing, drying, print, scour ability version and mended edition.) waste
time too much (the most general case, making a final screen frame needs
at least 2-3 hours) if processing version to other company the fee is
relatively high. Because almost screen printing machine cannot move and
when they fixed screen frame normally it would be move maximum 2cm,
right and life move maximum 5cm, Cause screen frame Plate pattern on the
screen print and printing products in version must be relatively
accurate. Otherwise, different situation can be make different worth
such like on the low side or high side or right side or life side,
bedplate to screen fixed position is not suitable, there may cause
printing deviation, also has the potential to cause waste version.
In the other side, the plate cost very
high, mostly buyer, need one screen can be repeatable, same cost, same
material, make more designed in one plate, it should be save cost ,but
normally one color screen printing machine it is fixed on bad plate,
when screen print and printing peoples need adjustment screen frame is
very difficult, one frame has design position also no working |
|
• This machine is particularly applicable to print kinds
of printing products that need to set on the bedplate, such as
t-shirts, hold pillow, headrest, bag ,Non-woven bag, etc;
• This machine is special developed; the bedplate is
45*55 centimeters T - shirt type.
• The machine screen frame chuck can make adjustment
according to printing height within 2 cm, and it is suitable for
printing 2cm thickness objects.
• Specially designed lift screen frame control springs,
the springs' tension can be adjusted, so that users can according to
the use of screen frame size, screen frame weight to adjust the tension
to make the tension suitable |
