Model:SWG-22A
Setting up
Put the crossbar on the housing, so that
the sliding pieces for the desired pipe size are positioned towards the
dented rod.
The sliding pieces are marked with the
various pipe sizes. Fasten the crossbar with the wing screw.
Choose the correct former and put it on
the dented rod. Pull the feed lever in indicated direction and push the
former and dented rod to the handle release feed lever.
SWG-22A
1/4'', 5/16'', 3/8'', 1/2'', 5/8'', 3/4'',
7/8''(6mm-22mm)
Operation
Turn the sliding pieces as such that the
related radius of the indicated pipe size is positioned opposite the
former.
Put the pipe in between the former and
sliding pieces. Press feed lever a few times in indicated
direction(upword),
and drive the former as far as desired. Pull the feed
lever downward and push the former if necessary with
the bent pipe
backwards, take the pipe out.
|