Funtion
1. Grip
on the saw with both hands, arms can be positioned against the back
stretch. The body is not aligned with either side of the saw blade.
2. When
the blade stuck, or sawing interrupted for any reason, release the
switch trigger and hold the saw does not move in the material until the
blade has completely stopped. The blade is in motion or may not occur in
case attempts to rebound away from the workpiece or the saw backward
pull circular saw.
3. When
restarting the circular saw in the workpiece, the saw-tooth blade
alignment cuts and check whether the inserted material
4. Support
large sheet to reduce harm blade squeezed and rebound
5. Not
use dull or damaged blade
6. Before
sawing, sawing depth and angle adjustment locking must be tightened and
tightened. |